The Cable Prowler™ combines network testing (physical layer and link), cable verification & troubleshooting and PoE voltage testing in a handheld tester with a full-color display; all with the capability of saving and printing tests results from a personal computer. 

Cable Verification & Troubleshooting:
The Cable Prowler provides full cable testing on any category network, coax, or telephone cable. It will display wire map, numbered ID remotes, and any faults, including shorts, opens, miswires, split pairs, and reverses, The full-featured Cable Prowler measures cable length (using TDR technology) and generates tone levels for signal tracing and cable identification on all pairs, a selected pair, or a selected pin.

PoE Voltage Testing:
The Cable Prowler enables quick identification of a network drops link capability and current link status. Cable Prowler also tests the presence of PoE on the network drop and what class of PoE per IEEE 802.3 af/at with load test for voltage drop. These network tests can also be saved for record keeping and printing.

Kit Includes:
Cable Prowler™ main unit
#1-8 Network/Tel Test and ID Smart Remote set
#1-8 Push on Coax ID-only Remote set
#1-12 RJ45 Data ID-only Remote set
Micro USB cable
No-Fault cable - Qty 2
RJ45 Port Saver
RJ45 to Alligator 12 inch
F Female to F Female adapters, set of 2
BNC Female to F Female adapter
BNC Female to F Male adapter
Heavy duty case

• Displays length measurement for each pair in feet or meters using TDR technology
• Full color graphical wire-mapping
• Tests Ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses
• Detects and reports current link speed and link capabilities for active Ethernet drops up to 1 Gbps
• Detects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop
• Ability to define cable name, save cable tests and print ALL results (cable testing & network testing)
• View saved cable tests
• Link light to identify location on a hub/switch/router port
• Supports up to 20 network & coax ID - only mapping remotes
• Supports up to 8 testing & ID SMART remotes for network & telephone cables
• Generates selectable tones on selected pins for use with tone tracers
• Multilingual (English, French, Spanish, German, and Italian)

APPLICATION

• Measure cable length and length to faults using TDR technology
• Network testing of link capability, link status, and link light
• Test PoE to ensure adequate power for powered devices such as VoIP phones
• Conduct single ended and remote cable tests with display of PASS, wire map, ID, and faults for network & coax cables
• Tone and trace cables
• Locate unlabeled network & coax cables with up to 20 remote identifiers
• Test multiple (up to 8) network & telephone drops with testing & identifier remotes
• Define a cable name for your cable test, save every cable test, export to your computer for record keeping and printing